»HSS DP E Kenyelletsa Li-Gear Cutters Ka PA20 Le PA14-1/2
Li-Gear Cutters
● #8 cutter bakeng sa 12&13 Cuts gears
● #7 cutter bakeng sa 14-16 Cuts gears
● #6 cutter bakeng sa 17-20 Cuts gears
● #5 cutter bakeng sa 21-25 Cuts gears
● #4 cutter bakeng sa 26-34 Cuts gears
● #3 cutter bakeng sa 35-54 Cuts gears
● #2 cutter bakeng sa 55-134 Cuts gears
● #1 cutter bakeng sa 135 ho isa ho Rack Cuts gears
Mofuta oa PA20
| DP | MOTS'OETSI DIA. | SEKOBA DIA. | 8pcs/sete |
| 4 | 3-5/8 | 1-1/4 | 660-7754 |
| 5 | 3-3/4 | 1-1/4 | 660-7755 |
| 6 | 3-1/2 | 1-1/4 | 660-7756 |
| 7 | 2-7/8 | 1 | 660-7757 |
| 8 | 2-7/8 | 1 | 660-7758 |
| 9 | 2-3/4 | 1 | 660-7759 |
| 10 | 2-3/4 | 1 | 660-7760 |
| 12 | 2-5/8 | 1 | 660-7761 |
| 14 | 2-1/2 | 1 | 660-7762 |
| 16 | 2-1/2 | 1 | 660-7763 |
| 18 | 2-3/8 | 1 | 660-7764 |
| 20 | 2-3/8 | 1 | 660-7765 |
| 24 | 2-1/4 | 1 | 660-7766 |
| 48 | 1-3/4 | 7/8 | 660-7767 |
Mofuta oa PA14-1/2
| MODULE | MOTS'OETSI DIA. | SEKOBA DIA. | 8pcs/sete |
| 2 | 5-3/4” | 1-1/2” | 660-7768 |
| 2-1/2 | 5-3/4 | 1-1/2 | 660-7769 |
| 3 | 5-1/4 | 1-1/4 | 660-7770 |
| 4 | 4-1/4 | 1-1/4 | 660-7771 |
| 5 | 3-5/8 | 1-1/4 | 660-7772 |
| 6 | 3-1/2 | 1-1/4 | 660-7773 |
| 7 | 2-7/8 | 1 | 660-7774 |
| 8 | 2-7/8 | 1 | 660-7775 |
| 9 | 2-3/4 | 1 | 660-7776 |
| 10 | 2-3/4 | 1 | 660-7777 |
| 11 | 2-3/8 | 1 | 660-7778 |
| 12 | 2-5/8 | 1 | 660-7779 |
| 14 | 2-1/2 | 1 | 660-7780 |
| 16 | 2-1/2 | 1 | 660-7781 |
| 18 | 2-3/8 | 1 | 660-7782 |
| 20 | 2-3/8 | 1 | 660-7783 |
| 22 | 2 | 7/8 | 660-7784 |
| 24 | 1-3/4 | 7/8 | 660-7785 |
| 26 | 1-3/4 | 7/8 | 660-7786 |
| 28 | 1-3/4 | 7/8 | 660-7787 |
| 30 | 1-3/4 | 7/8 | 660-7788 |
| 32 | 2-1/4 | 1 | 660-7789 |
| 48 | 1-3/4 | 7/8 | 660-7790 |
Kopo
Mesebetsi ea Gear Cutter:
1. Mochini oa Lisebelisoa:Li-gear cutters li sebelisetsoa ho sila profaele ea likere, ho netefatsa boholo le libopeho tse nepahetseng. Sena se kenyelletsa mefuta e fapaneng ea likere tse joalo ka likere tsa spur, likere tsa helical le likere tsa seboko.
2. Gear Truing:Nakong ea tlhahiso, li-gear cutters li boetse li sebelisoa ho netefatsa kapa ho lokisa bokaholimo ba likere ho fihlela litlhoko tsa moralo.
3. Nepahetse:Li-gear cutters li netefatsa hore li-gear li fihlella ho nepahala ho phahameng ka boholo le libopeho tsa jeometri, tse bohlokoa bakeng sa ts'ebetso e bonolo le ts'ebetso ea litsamaiso tsa phetisetso.
Ts'ebetso e Atlehang: Ho sebelisa li-gear cutters ho ka fihlela mochini o sebetsang hantle oa lisebelisoa, ho ntlafatsa katleho ea tlhahiso le ho fokotsa litšenyehelo tsa tlhahiso.
4. Ho feto-fetoha ha maemo:Li-gear cutters li ka sebelisoa eseng feela bakeng sa ho lokisa likere tsa tšepe empa hape le bakeng sa lisebelisoa tse entsoeng ka thepa e kang polasetiki le lehong, tse fanang ka mefuta e mengata ea lisebelisoa.
Tšebeliso le Litlhokomeliso Bakeng sa Sekhahi sa Gear:
Khetho ea Cutter:Khetha seha se loketseng sa gear se ipapisitseng le mofuta le lisebelisoa tsa lisebelisoa tse tla etsoa, hammoho le litlhaloso le mamello tse lakatsehang.
Tlhophiso:Beha sehahi sa li-gear ka mokhoa o sireletsehileng mochining oa ho sila ka mokhoa o sireletsehileng, ho netefatsa teka-tekano e nepahetseng le concentricity.
Ho lokisoa ha Workpiece:Koahela ka mokhoa o sireletsehileng sebaka sa ho sebetsa tafoleng ea mochini o silang, ho netefatsa botsitso le boemo bo nepahetseng bakeng sa mochini o nepahetseng.
Ho khaola li-Parameters:Beha litekanyetso tsa ho itšeha joalo ka lebelo, sekhahla sa phepelo, le botebo ba sehiloeng ho latela thepa le boholo ba lisebelisoa, hammoho le bokhoni ba mochini o silang.
Mokhoa oa ho etsa mochini:Kenya ts'ebetso ea ho sila ka hloko, 'me u netefatse motsamao o bonolo le o tsitsitseng oa mochini o silang ho pholletsa le sebaka sa mosebetsi ho fihlela boemo bo lakatsehang ba lisebelisoa le boholo.
Tšebeliso ea Pholiso:Ho ipapisitse le thepa e etsoang ka mochini, sebelisa sepholisa kapa setlolo ho theola mocheso le ho ntlafatsa phallo ea li-chip, ho netefatsa ts'ebetso e ntle ea ho itšeha le ho lelefatsa bophelo ba lisebelisoa.
Lisebelisoa tsa Tšireletso:Kamehla u roale lisebelisoa tse loketseng tsa tšireletso tse kang likhalase, liatlana, le tšireletso ea litsebe ho thibela likotsi tse bakoang ke li-chips tse fofang, lerata le likotsi tse ling.
Tlhahlobo ea Lisebelisoa:Kamehla hlahloba mochine o sehang lisebelisoa bakeng sa matšoao a ho khathala, ho senyeha kapa ho ba lerootho. Tlosa li-cutters tse tsofetseng kapa tse senyehileng kapele ho boloka boleng ba mochini le ho thibela likotsi.
Tlhokomelo ea Mochini: Boloka mochini o silang o le maemong a matle a ho sebetsa ka ho etsa mesebetsi ea kamehla ea ho lokisa joalo ka ho hloekisa, ho tlotsa le ho lekanya, ho netefatsa ts'ebetso e nepahetseng le polokeho.
Ho sebetsana le lisebelisoa:Tšoara li-gear cutters ka hloko ho qoba ho liha kapa ho li tšoara hampe, tse ka bakang tšenyo kapa kotsi. Sebelisa mekhoa e nepahetseng ea ho phahamisa le mekhoa ea polokelo ho boloka botšepehi ba sesebelisoa.
Tsamaiso ea Chip:Laola li-chips le li-swarf hantle tse hlahisitsoeng nakong ea machining ho thibela ho bokella le ho kena-kenana le mokhoa oa ho itšeha kapa likarolo tsa mochini.
Koetliso ea Basebetsi:Netefatsa hore basebetsi ba koetlisoa ka ho lekaneng le ho tloaelana le ts'ebetso ea li-gear cutters, ho kenyeletsoa mekhoa ea polokeho le mekhoa e nepahetseng ea mochini.
Molemo
Tšebeletso e Sebetsang hantle le e Tšepahalang
Lisebelisoa tsa Wayleading, morekisi oa hau oa sebaka se le seng bakeng sa lisebelisoa tsa ho seha, lisebelisoa tsa mochini, lisebelisoa tsa ho lekanya. Joalo ka setsi se kopaneng sa matla a indasteri, re motlotlo haholo ka Ts'ebeletso ea rona e Sebetsang le e Tšepahalang, e etselitsoeng ho fihlela litlhoko tse fapaneng tsa bareki ba rona ba hlomphuoang. Tobetsa Mona Bakeng sa Tse ling
Boleng bo Botle
Ho Lisebelisoa tsa Wayleading, boitlamo ba rona ba Boleng bo Botle bo re khetholla re le matla a maholo indastering. Joaloka setsi sa motlakase se kopantsoeng, re fana ka mefuta e fapaneng ea litharollo tsa indasteri tse tsoetseng pele, tse u fang lisebelisoa tse ntlehali tsa ho itšeha, lisebelisoa tse nepahetseng tsa ho lekanya, le lisebelisoa tse tšepahalang tsa mochini.TobetsaMona Bakeng sa Tse ling
Litheko tsa tlhōlisano
Rea u amohela ho Wayleading Tools, morekisi oa hau o le mong bakeng sa lisebelisoa tsa ho itšeha, lisebelisoa tsa ho lekanya, lisebelisoa tsa mochini. Re motlotlo haholo ka ho fana ka Litheko tsa Tlholisano e le o mong oa melemo ea rona ea mantlha. Tobetsa Mona ho Fumana Tse ling
OEM, ODM, OBM
Ho Lisebelisoa tsa Wayleading, re motlotlo ka ho fana ka lits'ebeletso tse felletseng tsa OEM (Moetsi oa Lisebelisoa tsa Original), ODM (Original Design Manufacturer), le OBM (Own Brand Manufacturer), tse fanang ka litlhoko le mehopolo ea hau e ikhethang.Tobetsa Mona Bakeng sa Tse ling
Mefuta e sa tšoaneng e Atolositsoeng
Rea u amohela ho Wayleading Tools, sebaka seo u eang ho sona bakeng sa litharollo tsa morao-rao tsa indasteri, moo re ipabolang ka ho seha lisebelisoa, lisebelisoa tsa ho metha, le lisebelisoa tsa mochini. Monyetla oa rona oa mantlha ke ho fana ka mefuta e mengata e fapaneng ea lihlahisoa, e etselitsoeng ho fihlela litlhoko tse fapaneng tsa bareki ba rona ba hlomphuoang.Tobetsa Mona Bakeng sa Tse ling
Lintho tse Tšoanang
Sekhechana se Kopantsoeng: DP Gear Cutter, Spline Cutter
E lumellana le Arbor: Mochini oa Mochini oa Metsing
Tharollo
Tšehetso ea tekheniki:
Re thabetse ho ba mofani oa hau oa tharollo bakeng sa mochini o sehang lisebelisoa. Re thabela ho u fa tšehetso ea tekheniki. Ebang ke nakong ea thekiso ea hau kapa ts'ebeliso ea bareki ba hau, ha re fumana lipotso tsa hau tsa tekheniki, re tla araba lipotso tsa hau hanghang. Re tšepisa ho araba nakong ea lihora tse 24 haufinyane, re u fa litharollo tsa tekheniki.Tobetsa Mona Bakeng sa Tse ling
Litšebeletso tse ikhethileng:
Re thabela ho u fa lits'ebeletso tse ikhethileng bakeng sa mochini o sehang lisebelisoa. Re ka fana ka litšebeletso tsa OEM, lihlahisoa tsa tlhahiso ho latela litšoantšo tsa hau; Litšebeletso tsa OBM, ho hlahisa lihlahisoa tsa rona ka letšoao la hau; le lits'ebeletso tsa ODM, ho fetola lihlahisoa tsa rona ho latela litlhoko tsa moralo oa hau. Ho sa tsotellehe hore na u hloka litšebeletso life, re tšepisa ho u fa litharollo tsa profeshenale.Tobetsa Mona Bakeng sa Tse ling
Litšebeletso tsa Koetliso:
Hore na o moreki oa lihlahisoa tsa rona kapa u mosebelisi oa ho qetela, re thabela ho fana ka ts'ebeletso ea koetliso ho netefatsa hore u sebelisa lihlahisoa tseo u li rekileng ho rona ka nepo. Lisebelisoa tsa rona tsa koetliso li tla ka litokomane tsa elektroniki, livideo le liboka tsa marang-rang, tse u lumellang ho khetha khetho e loketseng ka ho fetisisa. Ho tloha kopo ea hau ea koetliso ho isa ho phano ea litharollo tsa koetliso, re ts'episa ho phethela ts'ebetso eohle nakong ea matsatsi a 3 Tobetsa Mona Bakeng sa Tse ling
Tšebeletso ka mor'a thekiso:
Lihlahisoa tsa rona li tla le nako ea tšebeletso ea likhoeli tse 6 ka mor'a thekiso. Nakong ena, mathata leha e le afe a sa hlahisoang ka boomo a tla nkeloa sebaka kapa a lokisoe ntle ho tefo. Re fana ka ts'ehetso ea litšebeletso tsa bareki bosiu le motšehare, ho sebetsana le lipotso kapa litletlebo life kapa life, ho netefatsa hore u na le boiphihlelo bo monate ba ho reka. Tobetsa Mona Bakeng sa Tse ling
Moralo oa Tharollo:
Ka ho fana ka moralo oa sehlahisoa sa hau sa machining (kapa ho thusa ho theha litšoantšo tsa 3D haeba li sa fumanehe), litlhaloso tsa thepa, le lintlha tsa mochini tse sebelisitsoeng, sehlopha sa rona sa sehlahisoa se tla hlophisa likhothaletso tse loketseng bakeng sa lisebelisoa tsa ho seha, lisebelisoa tsa mochini le lisebelisoa tsa ho lekanya, le ho rala litharollo tse felletseng tsa machining. molemong oa hau. Tobetsa Mona Bakeng sa Tse ling
Ho paka
E phuthetsoe ka lebokoseng la polasetiki ka mokotla oa ho fokotsa mocheso. Ebe o paka sekhechana sa li-gear ka lebokoseng le ka ntle. E ka thijoa hantle hore e se ke ea rusa. Hape ho phutheloa ka mokhoa o ikhethileng ho amoheloa.
Katleho ea Lisebelisoa tsa Likoloi
DP Involute Gear Cutter ke sesebelisoa sa bohlokoa tlhahisong ea lisebelisoa, e etselitsoeng ka ho khetheha ho hlahisa likere tse nang le li-profiles tse nepahetseng. Li-cutters tsena, tse fumanehang ka mefuta e fapaneng ea boholo ba diametral pitch (DP), li sebetsana le litekanyo tse fapaneng tsa lisebelisoa le litlhaloso.
Indastering ea likoloi, DP Involute Gear Cutters e bapala karolo ea bohlokoa ho theheng likere tse rarahaneng bakeng sa litsamaiso tsa phetisetso le phapang. Ho nepahala ha bona ho tiisa hore ho sebetsa hantle ha lisebelisoa, ho kenya letsoho haholo ts'ebetsong le ts'ebetsong ea likoloi.
Aerospace Gear Precision
Tlhahisong ea sepakapaka, li-cutters tsena li bohlokoa bakeng sa ho theha likere tsa boleng bo holimo tse fumanehang lienjineng tsa lifofane le mecheng ea lisebelisoa tsa ho theoha. Li hlahisa likere tse khonang ho mamella maemo a ts'ebetso a feteletseng le meroalo, li fihlela litlhoko tse thata tsa lits'ebetso tsa sefofane.
Indasteri Mechine e tšoarellang
Bakeng sa tlhahiso ea mechini e boima le lisebelisoa tsa indasteri, DP Involute Gear Cutters e sebelisoa ho etsa likere tse kholo tse hlokahalang bakeng sa li-crane, literekere le litsamaiso tse tsamaisang thepa. Ho tšoarella le ho nepahala ha li-cutters tsena ke senotlolo sa bophelo bo bolelele le ho ts'epahala ha mechini e boima joalo.
Ho Nepaha ha Gear ea Liroboto
Ho liroboto le li-automation, li-gear cutters tsena li hiriloe ho etsa likere tse nyane, tse nepahetseng haholo tsa bohlokoa bakeng sa motsamao o nepahetseng le taolo e hlokahalang lits'ebetsong tsa liroboto.
Custom Gear Flexibility
Ho feta moo, ha ho etsoa lisebelisoa tse tloaelehileng, DP Involute Gear Cutter e fana ka phetoho ea ho theha likere tse nang le litlhoko tse ikhethang kapa tse ikhethileng. Ho ikamahanya le maemo ho bohlokoa bakeng sa ho hlahisa likere tsa tloaelo bakeng sa mochini o ikhethileng kapa bakeng sa ho nkela likarolo tsa lisebelisoa tsa khale.
Bokhoni ba DP Involute Gear Cutter ho hlahiseng likere tse nang le li-profiles tse kenyellelitsoeng hantle bakeng sa likarolo tse fapaneng, ho kenyeletsoa likoloi, sefofane le mechini ea indasteri, e totobatsa karolo ea eona ea bohlokoa tlhahisong ea sejoale-joale. Bokhoni ba eona ba ho amohela likere tsa boholo bo fapaneng le litlhaloso li e tšoaea e le sesebelisoa sa bohlokoahali lits'ebetsong tsa tlhahiso ea lisebelisoa.
Molemo oa ho Tsamaea Tseleng
• Tshebeletso e Sebetsang hantle le e Tshepehang;
• Boleng bo botle;
• Litheko tsa Tlholisano;
• OEM, ODM, OBM;
• Mefuta e mengata e fapaneng
• Phatlalatso e potlakileng le e ka tšeptjoang
Litaba tsa Sephutheloana
1 x HSS DP Kenyelletsa Li-Gear Cutters
● Na o hloka OEM, OBM, ODM kapa neutral packing bakeng sa lihlahisoa tsa hau?
● Lebitso la khamphani ea hau le lintlha tsa khokahanyo bakeng sa maikutlo a potlakileng le a nepahetseng.
Ho feta moo, re u mema hore u kope mehlala ea tlhahlobo ea boleng.
